Iron lactate is a gentle iron mordant for grey, brown and near-black tones in botanical printing and natural dyeing. Iron darkens colours.
The same leaf that gives a yellowish print on alum-mordanted fabric may produce grey-green or brown with iron.
If you’ve used iron sulphate, you’ll notice the difference. Iron lactate dissolves quickly and fully in water, without sediment or unexpected spots on the fabric.
This makes results more even and dosing easier. It is made from lactic acid produced by fermenting by-products of sugar and starch processing.
How to use
Dissolve 1–3 g of powder per 100 g of dry fabric. Start with the smaller amount: it is always easier to add iron than remove it.
For botanical printing, dip the leaves or blanket fabric in a solution of 1–2 g per litre of water before rolling. Rinse the printed fabric thoroughly in clean water afterwards.
Good to know
Too much iron, including iron lactate, can make fibres more brittle over time. Use particularly sparingly on silk.
Keep the powder and solutions away from children and animals.
Use dedicated dyeing utensils, not cooking pots. The same compound is known in the food industry as E585, but this powder is for dyeing, not eating.
Pack size: Available in 50 g and 100 g packs. A small amount goes a long way.
Ferrous lactate mordant and colour modifier for ecoprint and natural dyeing. Dissolves completely, gives soft greys, browns and blacks without spotting.





